Six Head Vial Liquid Filling Machine, NKLFRS 150SP Automatic Rotary Piston Liquid Filling Machines, Gujarat, India

Six Head Vial Liquid Filling Machine, Rubber Stoppering Machine

 
NKLFRS 150SP - Automatic Six Head Rotary Piston Type Vial Liquid Filling With Pick & Place Type Rubber Stoppereing Machine
 
Specifications :

Six Head Vial Liquid Filling Machine
  Model No.   NKLFRS-150SP
  Direction   Left to Right
  Production Rate   Up to 100 – 120 Vials/Min. (For 5 ml. Fill size)
  Fill Capacity   0.5 ml. to 100 ml ( Up to 50 ml. Single Dose & for 100 ml.   Double   Dose)
  Accuracy   ± 1 %

  Electrical Supply

  9.0 H.P.
  Power Requirement   415 Volts, 3 Phase (4 wire   system) 50 Hz
  Height of Conveyor   Adjustable from 900 to 950 MM
  Dimensions   3000 mm (L) x 1150 mm (W) x 1550 mm (H)
  Net weight   950 Kgs. (Approx).  

  Gross weight

  1250 Kgs. (Approx).

  Type of Rubber   Stoppering   Pick & Place
  Syringes available for   different fill volume

  0.5 ml. to 2 ml.
  2 ml. to 10 ml.
  10 ml. to 50 ml

  No. of Syringes   06 Nos.
 
Salient Features of Six Head Rotary Piston Type Vial Liquid Filling With Pick & Place Type Rubber Stoppering Machine :
Total CGMP model
“ No Vial No Filling System”
Contact Parts of S.S. 316L
Individual Servo Motor for Each Syringe
PLC System with Touch Screen HMI
Filling Volume controlled through PLC
3 Level Password setup in PLC
Machine can handle vial range from 2 ml. to 100 ml. & Rubber stopper of 13 mm, 20 mm & 32 mm size (With the help of change parts)
Machine Suitable for Full Stoppering as well as Half Stoppering (For Lypholized & Non Lypholized Vials)
 “Minimum Vial at in feed & maximum vial accumulation at out feed, machine stop and auto restart (Optional)
Auto Sampling System (Optional)
Auto Rejection system for those vials which are not stoppered after stoppering station (optional)
Two Track system at the out feed End one for OK Track and the other one for Sampling / Rejection (Only applicable if the machine is equipped with Auto sampling & Auto Rejection system)
“No rubber stopper in chute” machine stop system
“ No Vial no rubber stopper” System
Pre & Post gassing system
“ No Vial no gassing system”
Nitrogen pressure can be adjusted from HMI
“ Low Nitrogen pressure” machine stop system
Triclover Fitting in Syringes which makes the removal of syringe very easy
Acrylic Cabinet with Aluminium Structure.
All Assemblies under top plate are positioned as for easy cleaning or maintenance
Double dosing for 100ML is also possible
All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.
Machine speed can be adjusted through A.C. Frequency drive, which is time saving and the machine speed can be easily synchronized with unscrambler and conveyor.
Machine is provided with delran conveyor belt to avoid sticking of vial on conveyor
Special clutch devices are provided on Star wheel for safety purpose
Vibrator bowl for rubber stoppering unit support to run machine with total claimed speed of machine
 

Notes :

  • Right of technical improvements & modifications reserved
  • All illustrations & dimensions are show for information only


Home  |  About us  |  Contact  |  Enquiry
joomla visitors