NKPF 150DP Automatic Injectable Dry Powder Filling Machines, Injectable Dry Powder Filling Machine, Gujarat, India

Injectable Dry Powder Filling Machine, Rubber Stoppering Machine

 
NKPF 150DP - Automatic Injectable Dry Powder Filling With Pick & Place Type Rubber Stoppering Machine
 
Specifications :

Injectable Dry Powder Filling With Pick & Place
  Model No.   NKPF-150D
  Direction   Left to Right
  Production Rate   Up to 120 vials/Min. for Single Dose.
  Up to 60 Vials/Min. for Double Dose.
  Up to 40 Vials/Min. for Triple Dose.
  Up to 30 Vials/Min. for Four Dose

  Fill Capacity

  50 Mg to 1.5 Grms. Single Dose (with Change Parts),
  1.5 Grms. to 6 Grms. Double, Triple and Four Dose.
  Fill range depending upon vial opening and bulk density of   powder

  Accuracy

  ± 1% depending upon consistency and the uniformity
  Of bulk density of injectable powder under controlled Level of   Humidity (i.e. 25%).

  Electrical Supply

  7 H.P.
  Power Requirement   415 Volts, 3 Phase (4 wire System) 50 Hz
  Air Requirement   6 Kg/Cm2
  Height of Conveyor   Adjustable from 900 to 950 MM
  Dimensions   3300 MM (L) x 840 MM (W) x 2376 MM (H)
  Net weight   960 Kgs. (Approx).  

  Gross weight

  1250 Kgs. (Approx).

 
Salient Features of Injectable Dry Powder Filling With Pick & Place Type Rubber Stoppering Machine :
Total CGMP Model
Contact Parts are of S.S. 316L
M.S. Modules structure duly power coated and covered  with S.S. sheets
“NO VIAL NO FILL” System eliminates wastage of costly Powder
Machine is equipped with PLC system. The machine can be Run in manual mode as well as Auto Mode
Pick & Place type Rubber Stoppering System instead of standard Roller System
Inter lock for in feed and out feed accumulation of vials with Auto restart
Two Options available for Powder Loading
    1. Through New Design Mechanical Primary & Secondary Hopper with canister fitting through butterfly valve
    2. Screw Feeder System
No Vial No Rubber Stoppering”
“No Rubber Stopper in Chute machine Stop System”
Pressure Switch for Air / Nitrogen and Vacuum
No Air / Nitrogen /Vacuum Machine Stop
PLC  with Touch Screen HMI Unit
Powder Level Sensor for Level Control
Separate Gear Motor For Powder Hopper
Acrylic Cabinet with Aluminium Structure
3 Level Password setup in PLC
Auto Sampling System (optional)
Machine can handle vial range from 5ml to 100ml  (With the help of Change Parts)
Machine will be suitable for both 20mm & 32mm rubber Stopper (With the Help of Change parts)
All assemblies under top plate are positioned as for easy cleaning or maintenance
Multiple dosing of injectable powder or changeover of container size and different fill size is possible by just changing the vial separator or size of the piston respectively
All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil in floor area from gear box.
Machine speed can be adjusted through A.C. Frequency Drive, which is time saving & easy to synchronize unscrambler & scrambler speed with machine speed
Machine is provided with delran conveyor belt to avoid sticking of vial on conveyor
Special clutch devices are provided on vial separator for safety purpose
Vibrator bowl for rubber stoppering unit support to run machine with total claimed speed of machine
Air filter cartridge is of Nylon Make of  0.22 micron with S.S. 316 Housing
Vacuum filter cartridge is of Nylon Make with Housing of PVC transparent material
 

Notes :

  • Right of technical improvements & modifications reserved
  • All illustrations & dimensions are show for information only


Home  |  About us  |  Contact  |  Enquiry
joomla visitors