Eight Head Rotary Piston Type Vial Liquid Filling Machine, NKLFRS 200SR Automatic Liquid Filling Machines, Gujarat, India

Eight Head Rotary Piston Type Vial Liquid Filling Machine, Rubber Stoppering Machine

 
NKLFRS 200SR - Automatic Eight Head Rotary Piston Type Vial Liquid Filling with Pick & Place Type Rubber Stoppering Machine
 
Specifications :

Eight Head Vial Liquid Filling Machine
  Model No.   NKLFRS-200SR
  Direction   Left to Right
  Production Rate   Up to 180 – 200 Vials/Min. (For 5 ml. Fill size)
  Fill Capacity   0.5 ml. to 100 ml ( Up to 50 ml. Single Dose & for 100 ml. Double   Dose)
  Accuracy   ± 1 %

  Electrical Supply

  10 H.P.
  Power Requirement   415 Volts, 3 Phase (4 wire system) 50 Hz
  Height of Conveyor   Adjustable from 900 to 950 MM
  Dimensions   3500 mm (L) x 1538 mm (W) x 1638 mm (H)
  Net weight   1200 Kgs. (Approx).  

  Gross weight

  1450 Kgs. (Approx).

  Type of Rubber   Stoppering   Rotary Type
  Syringes available for   different fill volume

  0.5 ml. to 2 ml.
  2 ml. to 10 ml.
  10 ml. to 50 ml.

  No. of Syringes   08 Nos.
 
Salient Features :
Total CGMP model.
“No Vial No Filling System”.
M.S. Frame Structure duly gladded with S.S. Sheet.
Contact Parts of S.S. 316L.
Individual Servo Motor for Each Syringe.
PLC System with Touch Screen HMI.
Filling Volume controlled through PLC.
3 Level Password setup in PLC.
Machine can handle vial range from 2 ml. to 100 ml. & Rubber stopper of 13 mm, 20 mm & 32 mm size (With the help of change parts).
Rotary Disc Type Pick & Place Rubber Stoppering System suitable for Full Stoppering as well as Half Stoppering (For Lypholized & Non Lypholized Vials).
“Minimum Vial at in feed & maximum vial accumulation at out feed, machine stop and auto restart (Optional).
Auto Sampling System (Optional).
Auto Rejection system for those vials which are not stoppered after stoppering station (optional).
Two Track system at the out feed End one for OK Track and the other one for Sampling / Rejection (Only applicable if the machine is equipped with Auto sampling & Auto Rejection system).
Convenient to load Rubber Stopper into the bowl as the Bowl & Vibrator system are mounted on a Frame structure at a nominal height which makes the operator to view and load the rubber stopper as and when required.
“No rubber stopper in chute” machine stop system.
“ No Vial no rubber stopper” System.
Pre & Post gassing system.
“No Vial no gassing system”.
Nitrogen pressure can be adjusted from HMI.
“Low Nitrogen pressure” machine stop system'"
Triclover Fitting in Syringes which makes the removal of syringe very easy.
Acrylic Cabinet with Aluminium Structure..
All Assemblies under top plate are positioned as for easy cleaning or maintenance.
Double dosing for 100ML is also possible.
All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.
Machine speed can be adjusted through A.C. Frequency drive, which is time saving and the machine speed can be easily synchronized with unscrambler and conveyor.
Machine is provided with delran conveyor belt to avoid sticking of vial on conveyor.
Special clutch devices are provided on Star wheel for safety purpose.
Vibrator bowl for rubber stoppering unit support to run machine with total claimed speed of machine.
 

Notes :

  • Right of technical improvements & modifications reserved
  • All illustrations & dimensions are show for information only
 


Home  |  About us  |  Contact  |  Enquiry
joomla visitors